Medical Waste Incinerator

on October 28, 2020

Phone: +86-13813931455(whatsapp/wechat)
Website: http://www.hiclover.com/

Email: [email protected]
Email: [email protected]

Nanjing Clover Medical Technology Co.,Ltd.

HICLOVER Incinerator/Parts Range	Main Feature
Medical Waste Incinerators	HICLOVER 10-500kgs/Hr.Double Combustion Chambers
Single Combustion Chamber	Small, Cheap,10-20kgs/Hr.
Three Combustion Chambers(Optional)	3 Chambers for high risk waste
Pet Cremation Equipment	For Pet(small/big) Cremation Business
Animal Incineration Equipment	For other animal incineration

Items/Model	TS100(PLC)	TS150(PLC)	TS300(PLC)	TS500(PLC)
Burn Rate (Average)	100 kg/hour	150 kg/hour	300 kg/hour	500 kg/hour
Control Mode	PLC Auto.	PLC Auto.	PLC Auto.	PLC Auto.
Combustion Chamber	1200L	1500L	2000L	3000L
Internal Dimensions	120x100x100cm	150x100x100cm	170x120x100cm	210x120x120cm
Secondary Chamber	600L	750L	1000L	1500L
Smoke Filter Chamber	Dry Scrubber	Dry Scrubber	Dry Scrubber	Dry Scrubber
Feed Mode	Manual	Manual	Manual	Manual
Voltage	220V	220V	220V	220V
Power	1.38Kw	1.69Kw	2.57Kw	4.88Kw
Diesel Oil Consumption (kg/hour)	Ave.20.4	Ave.24.2	Ave.33	Ave.44
Natural Gas Consumption (m3n/hour)	Ave.24.5	Ave.29	Ave.39.6	Ave.52.8
Temperature Monitor	Yes	Yes	Yes	Yes
Temperature Protection	Yes	Yes	Yes	Yes
Oil Tank	200L	300L	500L	500L
Chimney	10Meter	10Meter	14Meter	14Meter
Chimney Type	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel
1st. Chamber Temperature	800℃–1000℃	800℃–1000℃	800℃–1000℃	800℃–1000℃
2nd. Chamber Temperature	1000℃-1200℃	1000℃-1200℃	1000℃-1200℃	1000℃-1200℃
Residency Time	2.0 Sec.	2.0 Sec.	2.0 Sec.	2.0 Sec.
Gross Weight	6000kg	8500kg	11000kg	16000kg
External Dimensions	260x150x180cm	300x160x190cm	400x210x300cm	450x210x300cm

www.hiclover.com

********************************************************************************************************

HICLOVER Solution for Fighting COVID-19, with CE Certification Pass.

1. Medical Waste Incinerator(Containerized Mobile Incinerator｜Top Loading Incinerator)

2. Auto Roll Air Filter for Clean Room

2020-10-28

Medical Environmental ｜Waste Incinerators ｜Auto Roll Air Filters

Medical Waste Incinerator ｜Mobile Incinerator｜

Pet Animal Incinerator｜Municipal Solid Waste Incinerator

Online Contact Form/Subscribe to Newsletter: http://www.hiclover.com/contact/

Power

Mcal/h 178 – 356

153 – 306

Fuel consumption rate L/h 15 – 30

Fuel Domestic fuel oil

Internal calorific value kWh/kg

Mcal 11.8

10.2 (10,200 kcal/Kg)

Density kg/dm3 0.82 C 0.85

Viscosity at 20°C mm2/s max 6

Operation Intermittent (1 min stop in 24 h)

One speed (on or off)

Sprinkler Number 1

Standard use Water, steam, diathermic oil boiler

Ambient temperature °C 0 C 40

Combustion Air Temperature °C max 60

Combustion temperature °C 900 to 1100

Destructive capacity Kg/h (l/h) 120 (1600)

Power supply V

Hz 230 +/- 10%

50 single-phase

Electric motor rpm

A 2800

0.25

230

2.1

Motor capacitor µF/V 8/450

Ignition transformer V1 – V2

I1 – I2 230V – 8kV

1.8A – 30mA

flow 12 bans

Pump – pressure range

temperature

kg/h

bar

°C max 65

10 C 18

Degree of protection IP 40

Power consumption w max 0.43

Chimney height m 6 to 8

Chimney diameter mm Approximately 500

Tank volume l 1000 to 1200

Number of ovens 2 to 3

Dimensions of the loading door cm About L80 x B60

Combustion chamber: One-piece casing made of 3- and 10-mm thick sheet steel. Loading front with sealed door mounted on hinges, screw-type closing wheel, flexible seal, and refractory insulating lining.

Chamber materials made of refractory concrete with an alumina content of 42%AL2O3 and a wall thickness of 115 mm. Equipped with thermal insulation in fibrous panels made of calcium silicate with a thickness of 75 mm. It must also be equipped with a waste ignition burner.

Post-combustion chamber A post-combustion chamber for gases meeting the emission standards for certain gases (CO, HCl, SO2, NOx, etc.).

Filter Allowing combustion control and regulation of the treatment process;

A filter for reducing air pollution from incineration

Metal scraper A metal scraper and an ash pan with handling handle.

Paint: light blue

Categories:

products

Tags:

Medical Environmental

Comments are closed

Recent Posts