STRONG WASTE INCINERATOR

Primary chamber — Consists of a monolithic high grade refractory concrete with high grade insulation backing,. Implementing a refractory hearth or equivalent for continuous ash removal.

Secondary Chamber — Consists of high density, low thermal mass refractory ceramic fiber with an innovative low emissivity protective coating.
Insulation    Material    Ceramic Fiber
Heating Source    Natural Gas + Propane or Gas Oil as an additional source
Temperature Control to Primary & Secondary Chambers    Required
Ingredients to be burned    Cotton, Rubber, PVC Sheets, PE Gloves, Oil, Plastic Bottles, Paper etc..
Off — Gas System    Required
Heating Source    Natural Gas

Secondary Chamber    Temperature *    1100 — 1300 deg. C
Refractory Material    Material *    Alumina ( 56 — 80% Pure )
Life Span *    10 — 15 decades.
Dimensional Sketch, Operation & Installation Manuals.     Required
Primary Chamber    Temperature Required*    800 — 1000 deg C.
Thickness    25 ” minimum
Off — Gas Residence Time     2 Seconds.
Heat Insulation    Required for indoor installation
2: Secondary Excess Air
1: Primary Controlled Air
Installation Requirements.     As low as possible.
Temperature Monitoring    Required
Component Name        Features                 Range.
Media    Slightly acidic
Rating Temperature    1600 — 1800 deg. C
Delivery    Karachi Sea Port – Pakistan

The details of Components of incinerator is as follows:
Chambers *    Dual Chamber.
System Status & Alarms    Required for all necessary parameters.
Fittings & Accessories    Complete Package is required ( Including Nozzles & Flanges etc..)
Feeding & Ash Removing     System    Air Tight ventilating locked doors ( Feeding from Top will be preferred)
Lining *    SS 316L
Spares    Required for 5 decades trouble free operation

Secondary Chamber    Temperature *    1100 – 1300 deg. C
Heating Source    Natural Gas + Propane or Fuel Oil as an additional source
Off – Gas Residence Time     2 Seconds.
Refractory Material    Material *    Alumina ( 56 – 80 % Pure )
Lining *    SS 316L
Life Span *    10 – 15 years.
Rating Temperature    1600 – 1800 deg. C
Media    Slightly acidic
Insulation    Material    Ceramic Fiber
Thickness    25 “ minimum
Feeding & Ash Removing     System    Air Tight ventilating locked doors ( Feeding from Top will be preferred)
Spares    Required for 5 Years trouble free operation