Parameter | Compliance |
Type of Waste | To treat medical waste, categories A,B,C,D,E |
Type of Incinerator | Pyrolytic |
Nominal Burn rate | 50 t0 60 kg/ hr at 3500Kcal/Kg |
Loading | Manual, Batch Load |
De Ashing | Automatic or Manual batch de ashing |
The incinerator must avoid the release of black smoke and fine dust during the loading | |
Primary chamber capacity | 2-3 m³ |
The insulation of the combustion chamber should be composed of refractory bricks, having a higher content of aluminium and insulates, | |
The plate of combustion in carborundum avoiding the fixing of glass and slags | |
Hours of operation /Day | >10 hrs |
Max Operating Temperatures | 1400 °C |
Normal Operating Temperatures(Primary) | >850 °C |
Operating Temperature(Secondary) | >1100 °C |
It should have digital temperatures regulator( Temperatures regulator in digital watch) | |
Carbon content of ashes | <2% |
The installation should be completely free from visible smoke as well as offensive odours | |
Residence time in second chamber | 2 second minimum |
The internal diameter of the Chimney | :Ø 400 |
Height of stack | >8m |
Burner operation | Automatic On/Off |
Fuel | Diesel |
Fuel consumption at raed capacity | >7kg waste /ltr |
Electricity consumption | <2kW at rated capacity |
Operating Voltage | 220 – 240V AC 50Hz |
Spare parts | Supply for 1 year quoted as option |
Consumables | Supply for 1 year of operation to be mentioned as option |
Warranty | Parts and service support: 1 year minimum post comissioning |
Service support | <72 hours |
Emission standard Compliance | BS3316 or equivqlent standard |
Process filtering system | Scruber to be mentioned as option |
CE Manufacturing Compliance | BS EN 746-2-1997 |
Design Specification | Type A,B,C,D,and E of medical waste |
Installation and Comissioning | Included in condition of supply |
Training in preventive and curative maintenance and use of the incinerator | Operator training inclusive in offer |
Capacity to treat Plastic | Not less than 40% by weight |
TECHNICAL DEMANDS: PYROLYTIC BURNER
Comments are closed