Basic Info.
Additional Info.
Product Description
Principle of This Incinerator equipment is incineration/combustion/burn.
| Items/Model | TS50(PLC) |
| Burn Rate | 50 kg/hour |
| Feed Capacity | 100kg |
| Control Mode | PLC |
| Combustion Chamber | 560L |
| Internal Dimensions | 100x80x70cm |
| Secondary Chamber | 280L |
| Smoke Filter Chamber | Yes |
| Feed Mode | Manual |
| Voltage | 220V |
| Power | 0.7Kw |
| Oil Consumption (kg/hour) | 12.1–24 |
| Gas Consumption (m3/hour) | 9.9–26.1 |
| Temperature Monitor | Yes |
| Temperature Protection | Yes |
| Oil Tank | 100L |
| Feed Door | 70x55cm |
| Chimney | 5Meter |
| Chimney Type | Stainless Steel |
| 1st. Chamber Temperature | 800 degree –1000 degree |
| 2nd. Chamber Temperature | 1000 degree -1200 degree |
| Residency Time | 2.0 Sec. |
| Gross Weight | 4500kg |
| External Dimensions | 230x130x155cm |
Considering Environmental Protection requirements and rules, virtually all incinerator have secondary combustion chamber (after-burn, post-combustion), even if third combustion room. The secondary burner burn off the Exhaust gas from main combustion chamber, this technology make sure sufficient combustion, few black smoke and smell. The updated incinerator technology concentrate on Exhaust gas treatment to remove Hazardous material and other purpose from incinerator, like heat recovery (waste to energy), save gas cost, PLC Automation operation. In some Developed nations, some fresh waste treatment method like High-temperature cooking, squander carbonization, devastating sterilization technology is instead of incineration technology.
Comments are closed